Products:
       =======================================================================
 


 

AUTOMATION PUMP CONTROLLER

Automatic pump controller is design with advance technology of Electronic based system is used to start & stop pumps automatically.

It gives solution for starting & stopping of the pumpset to avoid manual operation, It protects your pumps. It indicates status of water in your tanks.

 

Application :

A unique system to operate pump for

* Societies        * Bunglows                 * Housing complexes

 * Hotels             * Booster pumps etc.

 

Features:

* Mains ON indication

* Dry run prevention with siren

* Auto / manual switch for manual operation

* Suction low indication

* Pump ON indication

* Single phasing prevention

* Manual switch pump1 / pump2

* O/H tank full indication

* Easy to install.

 

Working Principle :

Operates on sensor based principal, in Overhead & Underground tank.

ADS APe pump controller specially for suction tank&0IH tank application.

AUTO mode

1) In Upper tank When water level goes below the lower sensor pump will be START&

when water level touches higher sensor pump get STOP to avoid overflow ofwater.

2) Same time it will check that ifthere is sufficient water in lower tank or not. Ifwater level

is below the lower sensor pump will get STOP.

3) In case dIy running pump will be stopped immediate~ with BEEP siren.

Reset button is provided in SEMI·AUTOMATIC mode.

Hig--~---~_...Uptank1 Up

 

    

ADS APe pump controller specially for multi O/H

tanks(non-interconnected).

 

 

 

 

 

 

 

These both systems can be use even in controlling liquids other than water.

 

AUTOMATIC PUMP CONTROLLER Models

APC 1013 : 230V For single phase One pump only

APC 2013 : 230V For single phase Two pump only

APC 2014 : 415V (Two pumps) with single phasing

prevention.

Specifications

Ape box ms powder coating

Dimensions: 160 mm x 160 mm x 110 mm

Sensors type : SS 304 or float (optional)

Weight : 2.5 kg

OUR RANGE OF PRODUCTS